-
STYLE
- Zip front with press stud fastened storm flap for additional waterproofing
- Elasticised cuff
- Two external lower pockets with touch tape flap
- Internal mobile phone pocket on LHS
- Internal pocket on RHS
- Quilted lining
- Fleece lined collar with foldaway hood
- Internal zipped embroidery access
- Waterproof with all seals seam sealed
- Reflective tape - H pattern with additional loop in the arms (Biomotion configuration)
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
- Waterproof fabric meets AS 2001.2.17-1987 (R2016) - Determination of resistance of fabrics to water penetration - Hydro-static pressure test
-
FEATURES
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two ventilated mesh back pleats and underarm mesh ventilation for extra comfort
- Two piece structured collar
- Sizes XXS-6XL
- Colours: Orange, Orange/Navy, Yellow/Navy
- 100% Cotton preshrunk drill 155gsm - 100% Cotton mesh ventilation
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
STYLE
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two piece structured collar
FEATURES
- Sizes XXS-6XL
- Colours: Orange/Navy, Yellow/Navy
- 100% Cotton preshrunk drill 190 gsm
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
STYLE
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two ventilated mesh back pleats and underarm mesh ventilation for extra comfort
- Two piece structured collar
- Reflective tape - hoop pattern
FEATURES
- Sizes (XS-6XL)
- Colours: Orange, Orange/Navy, Yellow/Navy, Pink/Navy, Yellow/Pink
- 100% Cotton preshrunk drill 155gsm - 100% Cotton mesh ventilation
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
- ** Pink/Navy only meets AS/NZS 4602.1:2011 - Class N.
-
STYLE
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two piece structured collar
- Reflective tape - hoop pattern
FEATURES
- Sizes XXS-6XL
- Colours: Orange/Navy, Yellow/Navy
- 100% Cotton preshrunk drill 190 gsm
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
STYLE
- Zip front with press stud fastened storm flap for additional waterproofing
- Internal elasticised ribbed cuff
- Two external lower pockets with flap
- External mobile phone/radio pocket with flap touch tape and D Ring attached to the bottom
- Internal zip pocket, pen support and mobile phone pocket on LHS
- Quilted lining
- Foldaway hood in the collar
- Internal zipped embroidery access
- Waterproof with all seals seam sealed
- Reflective tape - H pattern with additional loop in the arms (Biomotion configuration)
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
- Waterproof fabric meets AS 2001.2.17-1987 (R2016) - Determination of resistance of fabrics to water penetration - Hydrostatic pressure test
-
STYLE
- Elastic cuff
- Twin front internal pockets with zips
- Pen pocket on LHS sleeve in navy
- Elastic nylon drawstring on waistband
- 1/4 zip on front
- Two tone front and back
- 100% Polyester Anti-Pill Polar Fleece 300g
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
Features
- Reflective tape ‘Hoop’ pattern around lower leg
- Waterproof fabric with breathability - WP - 20,000mm (200Kpa/H2O), Class 3 under EN 343:203 - Protection Against Rain standard
- All seams are seam sealed
- Full elasticated waistband
- Lower leg in contrast colour for dirt protection
- Adjustable press stud hem opening
Fabric
- 300D Oxford Polyester, PU Coated (Breathable)
-
Features
- 100% Lightweight Polyester
- Upper body: extra large MAXCOOL mesh panels to aid airflow
- 50mm Retroreflective tape
- Two large velcro tabs each side for ease of putting on/taking off garment
- Plastic ID Pocket (right side)
- Large single pocket on front with velcro closures
- UPF 50+
- Complies with AS/NZS 1906,4:2010 and high-visibility standard AS/NZS 4602.1:2011
- Amendment no 1:2016-11-23, class D/N Safety Garment, suitable for Day & Night use
-
Features:
- 2 piece structured collar
- Two way radio loop or gas monitor loop on both sides
- Left pocket with pen division
- Twin Bisley signature single mitred chest pockets with plastic press snap flap closure
- Button through front style
- FR reflective tape ‘Hoop’ pattern around body and sleeve
- Full gusset sleeve cuff with plastic press snap closure
- Underarm ventilation
- Action back panel ventilation, 3 openings
- TenCate Tecasafe® Plus 700
- FR Modacrylic Lyocell Aramid 238gsm
-
Features:
- FR reflective tape ‘Hoop’ pattern around body and sleeve
- 2 piece structured collar
- Concealed press stud centre front closure
- Sleeve cuff with plastic press snap closure
- Action back panel ventilation and underarm ventilation
- Two way radio loop or gas monitor loop on both sides
- Twin Bisley signature single mitred chest pockets with plastic press snap flap closure and left pocket with pen division
- TenCate Tecasafe® Plus 480
- FR Modacrylic Lyocell Aramid 160 gsm
-
Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) Reflective Trim: Nil Class D only - Length: 1300mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength- These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global.
- This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure.
- Inherently flame resistant
- Electrical arc flash and flash fire protection
- Extremely comfortable to wear - soft and breathable
- Excellent moisture management
- Exceptional abrasion resistance
- IEast care washing and maintains like-new appearance after multiple industrial washes
-
Style
- Two Chest pockets with button down flaps
- Full gusset sleeve cuff opening
- Two- piece structured collar
- Stress points reinforce with heavy duty bar tacks
- All stitching is in FR Aramid thread
- FR Reflective tape on body and sleeves
Features
- Inherent Fabric
- Certified NFPA 2112 Flash Fire
- Certified EN ISO 11612
- Lenzing - Aramid - Modacrylic 230gsm
- NFPA70E Electrical Arc Protection
- ASTM F1959 (HRC2: ATPV 8.0cal/cm2 - HRC1: ATPV 6.8cal/cm2)
- The arc rating test results are independently tested in accordance to the ASTM F1959 standard
-
- ZETEL® ArcSafe Wet Weather Trousers - Navy - When your job requires you to wear hazard specific clothing to protect you from various risk levels, including FR Clothing or Switching Gear, you also require hazard specific Flame Resistant Waterproof Wet Weather Gear to complete your protective garment system. - ZETEL® ArcSafe Wet Weather Clothing offers increased hazard specific protective performance. - ZETEL® ArcSafe was developed to address specific needs and hazards in the electrical utility industry for Australasian conditions. - ZETEL® ArcSafe clothing is waterproof, breathable, windproof, flame resistant and offers protection against electric arc hazards. The breathability offers high comfort levels while the 3 layer construction ensures durability and protection. - ZETEL® ArcSafe has an ATPV rating of 8.9 cal/cm2 and therefore a PPE2 rating (HRC2). - All seams fully seam sealed - Elastic/ draw cord waist - Velcro cuff closure tabs to keep out water and cold -
Description
The WORX range from Force360 has been designed and developed in Australia to offer a multi-purpose low-cost product for those high-volume work environments. The WORX201 Cut 5 PU grip provides a reliable and assured grip for multiple applications.Features:
- HPPE liner provides not only a high level of cut resistance but a soft dexterous feel
- Knitted 13 gauge liner provides excellent dexterity for general purpose work
- Polyurethane coating provides a positive wet and dry grip and resists oil degradation
- Perfect form, fit and comfort is achieved through Force360’s unique knit pattern that mimics a ‘hand at rest’, minimizing hand fatigue
- Only selected materials that allow airflow are used to ensure 360-degree air circulation and enhanced breathability
- UPF50+ offering maximum sun protection
Standards & Certification
-
DESCRIPTION Ninja® HPT™ GripX is the most lightweight multipurpose glove based on Ninja®’s HPT™ Technology. It provides superior grip and dexterity in wet, dry and oily conditions. FEATURES • COATING – Proprietary HPT™ coating • SUPERIOR GRIP – Soft, durable and flexible micro-foam coating with a non-slip surface that repels liquid to provide the highest level of wet, oily and dry grip • VIBRATION ABSORPTION – Encapsulated air pockets absorb and mitigate the effects of light vibrations before it reaches the hands • COMFORT – Highly flexible coating and breathable nylon liner offers all-day comfort APPLICATIONS • Shipping and receiving • Plumbing • General purpose • Food handling • Warehousing • Materials handling and assembly • Food processing • Gardening PROPRIETARY TECHNOLOGY HPT™ - Superior Grip and Dexterity The Hydropellent Technology (HPT™) is a unique proprietary coating that repels liquid and provides excellent grip in wet, dry and oily conditions. The HPT™ offers secure handling gloves that are lightweight, have superior grip and dexterity, whilst being supremely comfortable. Further, this unique coating has “encapsulated air pockets” which absorb and mitigate the effects of light vibrations. SMART TECHNOLOGIES BREATHESMART This is the art of ensuring 360 degree breathability for the hands. FITSMART This is the art of making Ninja® gloves feel like a second skin. GRIPSMART This is the art of providing outstanding grip to Ninja® gloves in dry, wet and oily conditions. HAND CARE TECHNOLOGIES
STANDARDS AND CERTIFICATIONS
-
- Seamless 15 gauge nylon for superior dexterity - 3/4 coat for back of hand protection - Foam PVC HPT coat provides a spongy, durable and flexible grip - The HPT further repels liquid to ensure excellent wet and dry grip. - Encapsulated air molecules provide vibration absorption - Foam PVC unlike nitrile resists many glues, making it ideal for woodworking and auto assembly - Sanitised with Actifresh® to kill bacteria and promote freshness -
- Polyurethane coated nylon shell - Seamless 18 gauge lint free nylon liner for ultimate dexterity - Breathable PU coating - Excellent wet and dry grip - PU coating does not taint products being handled - Abrasion and tear resistant - Light weight - Sanitised with Actifresh® to kill bacteria and promote freshness

Features: