-
- ZETEL® ArcSafe Wet Weather Trousers - Navy - When your job requires you to wear hazard specific clothing to protect you from various risk levels, including FR Clothing or Switching Gear, you also require hazard specific Flame Resistant Waterproof Wet Weather Gear to complete your protective garment system. - ZETEL® ArcSafe Wet Weather Clothing offers increased hazard specific protective performance. - ZETEL® ArcSafe was developed to address specific needs and hazards in the electrical utility industry for Australasian conditions. - ZETEL® ArcSafe clothing is waterproof, breathable, windproof, flame resistant and offers protection against electric arc hazards. The breathability offers high comfort levels while the 3 layer construction ensures durability and protection. - ZETEL® ArcSafe has an ATPV rating of 8.9 cal/cm2 and therefore a PPE2 rating (HRC2). - All seams fully seam sealed - Elastic/ draw cord waist - Velcro cuff closure tabs to keep out water and cold -
Style
- Two Chest pockets with button down flaps
- Full gusset sleeve cuff opening
- Two- piece structured collar
- Stress points reinforce with heavy duty bar tacks
- All stitching is in FR Aramid thread
- FR Reflective tape on body and sleeves
Features
- Inherent Fabric
- Certified NFPA 2112 Flash Fire
- Certified EN ISO 11612
- Lenzing - Aramid - Modacrylic 230gsm
- Â NFPA70E Electrical Arc Protection
- ASTM F1959 (HRC2: ATPV 8.0cal/cm2Â -Â HRC1: ATPV 6.8cal/cm2)
- The arc rating test results are independently tested in accordance to the ASTM F1959 standard
-
Style
- Two Chest pockets with button down flaps
- Full gusset sleeve cuff opening
- Two- piece structured collar
- Stress points reinforce with heavy duty bar tacks
- All stitching is in FR Aramid thread
- FR Reflective tape on body and sleeves
Features
- Inherent Fabric
- Certified NFPA 2112 Flash Fire
- Certified EN ISO 11612
- Lenzing - Aramid - Modacrylic 185gsm
- Â NFPA70E Electrical Arc Protection
- ASTM F1959 (HRC1: ATPV 6.8cal/cm2 - HRC2: ATPV 8.0cal/cm2 )
- The arc rating test results are independently tested in accordance to the ASTM F1959 standard
-
Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) Reflective Trim: Nil Class D only - Length: 1300mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength- These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global.
- This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure.
- Inherently flame resistant
- Electrical arc flash and flash fire protection
- Extremely comfortable to wear - soft and breathable
- Excellent moisture management
- Exceptional abrasion resistance
- IEast care washing and maintains like-new appearance after multiple industrial washes
-
Features:
-  FR reflective tape ‘Hoop’ pattern around body and sleeve
- Â 2 piece structured collar
- Â Concealed press stud centre front closure
- Â Sleeve cuff with plastic press snap closure
- Â Action back panel ventilation and underarm ventilation
- Â Two way radio loop or gas monitor loop on both sides
- Â Twin Bisley signature single mitred chest pockets with plastic press snap flap closure and left pocket with pen division
-  TenCate Tecasafe® Plus 480
- Â FR Modacrylic Lyocell Aramid 160 gsm
-
Features:
- 2 piece structured collar
- Two way radio loop or gas monitor loop on both sides
- Left pocket with pen division
- Twin Bisley signature single mitred chest pockets with plastic press snap flap closure
- Button through front style
- FR reflective tape ‘Hoop’ pattern around body and sleeve
- Full gusset sleeve cuff with plastic press snap closure
- Underarm ventilation
- Action back panel ventilation, 3 openings
- TenCate Tecasafe® Plus 700
- FR Modacrylic Lyocell Aramid 238gsm
-
Features
- Reflective tape ‘Hoop’ pattern around lower leg
- Waterproof fabric with breathability - WP - 20,000mm (200Kpa/H2O), Class 3 under EN 343:203 - Protection Against Rain standard
- All seams are seam sealed
- Full elasticated waistband
- Lower leg in contrast colour for dirt protection
- Adjustable press stud hem opening
Fabric
- 300D Oxford Polyester, PU Coated (Breathable)
-
STYLE
- Elastic cuff
- Twin front internal pockets with zips
- Pen pocket on LHS sleeve in navy
- Elastic nylon drawstring on waistband
- 1/4 zip on front
- Two tone front and back
- 100% Polyester Anti-Pill Polar Fleece 300g
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification

- Certified NFPA 2112 Flash Fire
- Certified EN ISO 11612
- NFPA70E Electrical Arc Protection
- ASTM F1959 (HRC1: ATPV 6.8cal/cm2*; HRC2: ATPV 8.0cal/cm2)
- The arc rating test results are independently tested in accordance to the ASTM F1959 standard.