Call For Expert Advice:Features:
- Super lightweight
- Excellent fit, dexterity and performance
- 360° breathability
- Durable and breathable nitrile coating
- Sizes 7 to 12
-
Only $3.50 excl gst per glove! -
Only $3.40 excl gst per glove!Features:
- Super lightweight
- Â Excellent fit, dexterity and performance
-  360° breathability
- Â Durable and breathable nitrile coating
- Â Sizes 7 to 12
-
Minimum Pack of 12Features:
- First glove to combine outstanding flame resistance, high cut protection and ergonomic design.
- Materials used in the glove are inherently flame resistant, even after washing.
- Arc Flash Hazard/Risk Category 2*: helps protect workers against arc flash hazards.
- Exclusive composite yarn provides exceptional cut resistance for safe handling of sharp objects and materials.
- Soft foam coating to ensure great flexibility and a secure grip in a variety of environment.
- Ergonomic design for superior comfort and reduced hand fatigue.
-
General-purpose gloves. -
Only $5.50 each Excl GST!Features:
- High-performance Nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves
- Reversed lozenge palm finish for improved dry/wet grip
- Foldable cuff gutter to prevent dripping on the forearm
- The AlphaTec AQUADRI gloves are addressing the most relevant need for the workers sweat reduction.Less sweat equals greater comfort and performance
- Longer version than the 58-330 for further protection
- Compliant with FDA food handling requirements
- Also available in vend pack
-
Features:
- Extreme resistance against a wide range of chemicals.
- Chemical resistant, five layers laminated glove.
- Hand-specific and ergonomic design.
- Wide spectrum resistance.
-
Features:
- 38-514 offers superior protection against aldehydes, ketones and esters as well as concentrated mineral acids
- The glove is very flexible and provides excellent dexterity
- Designed for comfort, with a natural, curved ergonomic shape and soft feel, they offer easy donning and good grip
- The absence of latex proteins means there’s no risk of latex allergies
- Rough finish on the hand section of the glove for safer handling
-
- Delivers a unique balance of ergonomic design and tactile sensitivity with optimum chemical splash protection - Viton® gloves provide an extra level of protection in applications involving aromatic chemicals and chlorinated solvents - The Viton® layer over the butyl means a lower cost glove for aggressive chemical exposure - Each pair is packed with an individual insert so critical information is always at your fingertips -
- A glove offering even better performance for light to medium stress glass handling. - Crinkle finish provides excellent wet and dry grip on slippery surfaces but also protects the hand from sharp edges. - Ergonomically designed to follow the natural shape of the hand. - A more natural glove shape delivers a better fit and makes for safer handling. - Good cushioning, good cut resistance, good comfort. -
- Outwears cotton up to 12-to-1, lightweight leather 5-to-1, and PVC-coated gloves 3-to-1 - Comfortable cotton lining with nitrile coating for exceptional snag, puncture, abrasion and cut resistance - Unique interlock knit liner and contoured design ensure excellent flexibility and dexterity -
- Ansell’s HyFlex® 11-435 glove is the first cut-resistant level 5 glove on the market made with water-based polyurethane - Extreme resistance to cuts and burrs. A seamless plaited glove for very good fit, dexterity and flexibility. Excellent breathability and cool feeling - Water-based polyurethane enhances the dexterity and comfort of the glove, as the polyurethane doesn’t penetrate inside it -
- Ansell’s HyFlex® 11-500 industrial glove is well suited for a broad range of assembly applications - It is designed for dry or slightly oily applications where workers need light cut protection, and in some cases, isolation from heat or flying molten metal debris - Offering optimal comfort and a sure grip, the HyFlex® 11-500 glove is the versatile choice for optimal productivity and safety -
- Ansell’s HyFlex® 11-501 glove is designed to significantly raise the standards of protection and dexterity for cut-resistant gloves. This achievement has been made, thanks to Ansell’s Intercept technology - The HyFlex® 11-501 glove is also resistant to heat, allowing versatile use - When workers need high levels of protection with optimal productivity, the HyFlex® 11-501 glove is the answer -
- The first 18-gauge glove with EN Level 3 cut protection, and EN Level 3 abrasion protection for extended glove life - Dyneema® Diamond Technology fiber and a thin PU coating bring a new degree of dexterity and tactility for applications with cut risks - An ultralight fabric and tailored fit, including D3 Pinky Knitting, create a sensation of barehand contact - The soft ultralight-duty seamless liner breathes to keep hands cool and dry, and offers enhanced flexibility and fingertip sensitivity with superior comfort - Comprehensive 6-11 sizing ensures optimum fit and comfort for every worker - In field trials the HyFlex® 11-518 was preferred by nearly 70% of workers over thicker gloves, a preference that correlates with compliance -
- Designed for light and delicate applications in dry environments that require maximal levels of dexterity. - Like a second skin, they offer comfortable, exact handling of small objects. - They also ensure product protection from glove-generated debris, and cross-product contamination. - When your operators need precision and/or clean handling, HyFlex® 11-600 gloves are the answer. -
- Almost a second skin, this very thin glove offers outstanding comfort, fit and sensitivity for the most delicate handling. - 18-gauge knitting technology allows this glove to be ultra-thin yet tough. - Designed for a wide range of lightweight applications in dry or slightly oily environments, it is ideal for workers who need a higher level of fit, touch and precision than that offered by their current gloves. - Also ideal for applications where cotton gloves or no gloves at all are used despite the risk of scrapes, blisters and minor injuries. - In addition, the 11-618 dark liners are well-suited for environments that present a certain degree of dirt. -
- The HyFlex® 11-625, 11-627 and 11-628 gloves deliver a perfect balance of comfort and sure handling with superior cut resistance - The liners have an innovative yarn structure that contains an optimal rate of Dyneema®. This offers high levels of cut resistance, for a safe use in controlling, handling and assembly applications involving contacts with sharp pieces - The Lycra® in the liners of both gloves, as well as the polyurethane coating, provides excellent flexibility and fit - The models are designed for use in dry, as well as slightly oily environments
