-
Rain Storm Jacket Breathable - Yellow -
Features
- Polyester PU coated outer with quilted lining
- UPF 50+ high sun protection
- Waterproof-all sealed seams
- Rib knit collar & cuffs
- 2 front & 3 inside pockets
- Plastic front zipper
- Hi Vis class DN
-
STYLE
- Zip front with press stud fastened storm flap for additional waterproofing
- Elasticised cuff
- Two external lower pockets with touch tape flap
- Internal mobile phone pocket on LHS
- Internal pocket on RHS
- Quilted lining
- Fleece lined collar with foldaway hood
- Internal zipped embroidery access
- Waterproof with all seals seam sealed
- Reflective tape - H pattern with additional loop in the arms (Biomotion configuration)
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
- Waterproof fabric meets AS 2001.2.17-1987 (R2016) - Determination of resistance of fabrics to water penetration - Hydro-static pressure test
-
FEATURES
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two ventilated mesh back pleats and underarm mesh ventilation for extra comfort
- Two piece structured collar
- Sizes XXS-6XL
- Colours: Orange, Orange/Navy, Yellow/Navy
- 100% Cotton preshrunk drill 155gsm - 100% Cotton mesh ventilation
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
FEATURES
- 155 gsm lightweight
- UPF 50+ high sun protection
- Shoulder & underarm air vents
- Pleated back & longer tail
- Double-stitched for strength
- Deep pockets & pen holder
- Spare buttons
- Hi Vis class D
-
STYLE
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two piece structured collar
FEATURES
- Sizes XXS-6XL
- Colours: Orange/Navy, Yellow/Navy
- 100% Cotton preshrunk drill 190 gsm
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
STYLE
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two ventilated mesh back pleats and underarm mesh ventilation for extra comfort
- Two piece structured collar
- Reflective tape - hoop pattern
FEATURES
- Sizes (XS-6XL)
- Colours: Orange, Orange/Navy, Yellow/Navy, Pink/Navy, Yellow/Pink
- 100% Cotton preshrunk drill 155gsm - 100% Cotton mesh ventilation
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
- ** Pink/Navy only meets AS/NZS 4602.1:2011 - Class N.
-
STYLE
- Two button adjustable cuff
- Twin button flap pockets, the left pocket with pen division
- Two piece structured collar
- Reflective tape - hoop pattern
FEATURES
- Sizes XXS-6XL
- Colours: Orange/Navy, Yellow/Navy
- 100% Cotton preshrunk drill 190 gsm
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
STYLE
- Zip front with press stud fastened storm flap for additional waterproofing
- Internal elasticised ribbed cuff
- Two external lower pockets with flap
- External mobile phone/radio pocket with flap touch tape and D Ring attached to the bottom
- Internal zip pocket, pen support and mobile phone pocket on LHS
- Quilted lining
- Foldaway hood in the collar
- Internal zipped embroidery access
- Waterproof with all seals seam sealed
- Reflective tape - H pattern with additional loop in the arms (Biomotion configuration)
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
- Waterproof fabric meets AS 2001.2.17-1987 (R2016) - Determination of resistance of fabrics to water penetration - Hydrostatic pressure test
-
Features
- Polyester PU coated outer with polyester lining
- Waterproof-all sealed seams
- 2 way nylon zip with storm flap
- High collar with concealed hood
- 2 front pockets & pen holder
- Reversible polar fleece vest
- Hi Vis class DN-3M Tape
-
FEATURES
- 100% Polyester
- Durable Polymesh knit CoolDry
- Conforms to AS/NZS 4602.1:2011
- Class D day use safety wear with UV rated.
- Contrast collar with two stripes Contrast lower front garment & collar
-
STYLE
- Elastic cuff
- Twin front internal pockets with zips
- Pen pocket on LHS sleeve in navy
- Elastic nylon drawstring on waistband
- 1/4 zip on front
- Two tone front and back
- 100% Polyester Anti-Pill Polar Fleece 300g
STANDARDS
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day Use
- Meets AS/NZS 1906.4:2010 Retro reflective materials & High Visibility materials for safety garments
- Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
-
FEATURES
- 190 gsm cotton
- UPF 50+ high sun protection
- Open front & pleated back
- Longer tail
- Double-stitched for strength
- Deep pockets & pen holder
- Spare buttons
- Hi Vis class DN-3M 8910 tape
-
FEATURES
- Front Nylon Zipper
- Front Clear ID Pocket
- Elastic adjustment on side
- Grey Contrast Piping
- AS/NZS 4602.1.2011
- AS/NZS 1906.4.2010
-
Features
- Reflective tape ‘Hoop’ pattern around lower leg
- Waterproof fabric with breathability - WP - 20,000mm (200Kpa/H2O), Class 3 under EN 343:203 - Protection Against Rain standard
- All seams are seam sealed
- Full elasticated waistband
- Lower leg in contrast colour for dirt protection
- Adjustable press stud hem opening
Fabric
- 300D Oxford Polyester, PU Coated (Breathable)
-
Rain Coat -
Rain Jacket -
Features
- 100% Lightweight Polyester
- Upper body: extra large MAXCOOL mesh panels to aid airflow
- 50mm Retroreflective tape
- Two large velcro tabs each side for ease of putting on/taking off garment
- Plastic ID Pocket (right side)
- Large single pocket on front with velcro closures
- UPF 50+
- Complies with AS/NZS 1906,4:2010 and high-visibility standard AS/NZS 4602.1:2011
- Amendment no 1:2016-11-23, class D/N Safety Garment, suitable for Day & Night use
-
Rain Pants -
Freezer Jacket -
Features:
- 2 piece structured collar
- Two way radio loop or gas monitor loop on both sides
- Left pocket with pen division
- Twin Bisley signature single mitred chest pockets with plastic press snap flap closure
- Button through front style
- FR reflective tape ‘Hoop’ pattern around body and sleeve
- Full gusset sleeve cuff with plastic press snap closure
- Underarm ventilation
- Action back panel ventilation, 3 openings
- TenCate Tecasafe® Plus 700
- FR Modacrylic Lyocell Aramid 238gsm
-
Features:
- FR reflective tape ‘Hoop’ pattern around body and sleeve
- 2 piece structured collar
- Concealed press stud centre front closure
- Sleeve cuff with plastic press snap closure
- Action back panel ventilation and underarm ventilation
- Two way radio loop or gas monitor loop on both sides
- Twin Bisley signature single mitred chest pockets with plastic press snap flap closure and left pocket with pen division
- TenCate Tecasafe® Plus 480
- FR Modacrylic Lyocell Aramid 160 gsm
-
Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) Reflective Trim: Nil Class D only - Length: 1300mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength- These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global.
- This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure.
- Inherently flame resistant
- Electrical arc flash and flash fire protection
- Extremely comfortable to wear - soft and breathable
- Excellent moisture management
- Exceptional abrasion resistance
- IEast care washing and maintains like-new appearance after multiple industrial washes
-
Features: - Certified NFPA 2112 Flash Fire - Certified EN ISO 11612 - NFPA70E Electrical Arc Protection - ASTM F1959 (HRC1: ATPV 6.8cal/cm2*; HRC2: ATPV 8.0cal/cm2) - The arc rating test results are independently tested in accordance to the ASTM F1959 standard. -
Features:
- Inherent Fabric
- Certified NFPA 2112 Flash Fire
- Certified EN ISO 11612
- NFPA70E Electrical Arc Protection
- ASTM F1959 (HRC1: ATPV 6.8cal/cm2*; HRC2: ATPV 8.0cal/cm2)
- The arc rating test results are independently tested in accordance to the ASTM F1959 standard.
-
Style
- Two Chest pockets with button down flaps
- Full gusset sleeve cuff opening
- Two- piece structured collar
- Stress points reinforce with heavy duty bar tacks
- All stitching is in FR Aramid thread
- FR Reflective tape on body and sleeves
Features
- Inherent Fabric
- Certified NFPA 2112 Flash Fire
- Certified EN ISO 11612
- Lenzing - Aramid - Modacrylic 185gsm
- NFPA70E Electrical Arc Protection
- ASTM F1959 (HRC1: ATPV 6.8cal/cm2 - HRC2: ATPV 8.0cal/cm2 )
- The arc rating test results are independently tested in accordance to the ASTM F1959 standard
-
- Certified NFPA 2112 Flash Fire
- Certified EN ISO 11612
- NFPA70E Electrical Arc Protection
- ASTM F1959 (HRC1: ATPV 6.8cal/cm2*; HRC2: ATPV 8.0cal/cm2)
- The arc rating test results are independently tested in accordance to the ASTM F1959 standard. -
- Further testing of the TouchNTuff® by a certified body on an even wider range of chemicals confirms that it resists a greater variety of industrial chemicals for longer periods than any other nitrile disposable gloves. - Manufactured from nitrile, TouchNTuff® offers up to four times the puncture resistance of comparable natural-latex gloves, and three times the resistance of similar neoprene gloves. - It contains no natural rubber proteins, which means no risk of Type I allergies for the wearer. - Primary skin irritation studies and Insult Patch tests have also shown no evidence of risk from irritation or allergic contact dermatitis. - With a unique Thin Nitrile Technology formulation, this glove offers easy donning and strong grip in wet or dry conditions. -
Description
The WORX range from Force360 has been designed and developed in Australia to offer a multi-purpose low-cost product for those high-volume work environments. The WORX201 Cut 5 PU grip provides a reliable and assured grip for multiple applications.Features:
- HPPE liner provides not only a high level of cut resistance but a soft dexterous feel
- Knitted 13 gauge liner provides excellent dexterity for general purpose work
- Polyurethane coating provides a positive wet and dry grip and resists oil degradation
- Perfect form, fit and comfort is achieved through Force360’s unique knit pattern that mimics a ‘hand at rest’, minimizing hand fatigue
- Only selected materials that allow airflow are used to ensure 360-degree air circulation and enhanced breathability
- UPF50+ offering maximum sun protection
Standards & Certification
-
- Made from 100% Extra Heavy Duty Nitrile - Specifically designed for use in the industrial, automotive repair and paint trade - Stronger, thicker, and more resistant to chemicals when compared to a regular disposable Nitrile glove - Improved protection from oils, grease, fuels, cleaners, solvents, chemicals, & transmission fluid - This glove has hypoallergenic properties for sensitive skin types - Low odour nitrile glove - Latex free and Vinyl free glove material delivers superior comfort for extended wear - Ambidexrous glove with textured palm and fingers for enhanced grip in wet and dry conditions -
- A/B grade beige cow grain - Cut level 2 protection - Wing thumb allows better open hand pulling and grabbing - Insewn elastic - 250mm Length -
DESCRIPTION Ninja® HPT™ GripX is the most lightweight multipurpose glove based on Ninja®’s HPT™ Technology. It provides superior grip and dexterity in wet, dry and oily conditions. FEATURES • COATING – Proprietary HPT™ coating • SUPERIOR GRIP – Soft, durable and flexible micro-foam coating with a non-slip surface that repels liquid to provide the highest level of wet, oily and dry grip • VIBRATION ABSORPTION – Encapsulated air pockets absorb and mitigate the effects of light vibrations before it reaches the hands • COMFORT – Highly flexible coating and breathable nylon liner offers all-day comfort APPLICATIONS • Shipping and receiving • Plumbing • General purpose • Food handling • Warehousing • Materials handling and assembly • Food processing • Gardening PROPRIETARY TECHNOLOGY HPT™ - Superior Grip and Dexterity The Hydropellent Technology (HPT™) is a unique proprietary coating that repels liquid and provides excellent grip in wet, dry and oily conditions. The HPT™ offers secure handling gloves that are lightweight, have superior grip and dexterity, whilst being supremely comfortable. Further, this unique coating has “encapsulated air pockets” which absorb and mitigate the effects of light vibrations. SMART TECHNOLOGIES BREATHESMART This is the art of ensuring 360 degree breathability for the hands. FITSMART This is the art of making Ninja® gloves feel like a second skin. GRIPSMART This is the art of providing outstanding grip to Ninja® gloves in dry, wet and oily conditions. HAND CARE TECHNOLOGIES
STANDARDS AND CERTIFICATIONS
-
- Seamless 15 gauge nylon for superior dexterity - 3/4 coat for back of hand protection - Foam PVC HPT coat provides a spongy, durable and flexible grip - The HPT further repels liquid to ensure excellent wet and dry grip. - Encapsulated air molecules provide vibration absorption - Foam PVC unlike nitrile resists many glues, making it ideal for woodworking and auto assembly - Sanitised with Actifresh® to kill bacteria and promote freshness -
- Polyurethane coated nylon shell - Seamless 18 gauge lint free nylon liner for ultimate dexterity - Breathable PU coating - Excellent wet and dry grip - PU coating does not taint products being handled - Abrasion and tear resistant - Light weight - Sanitised with Actifresh® to kill bacteria and promote freshness -
Features
- Wide and protective brim
- Adjustable chin strap
Sizes
- S = 55cm
- M = 57cm
- L = 59cm
- XL = 61cm
-
Description
Lightweight and Durable Hi-Vis Straw Hat. Has a wide brim with an adjustable chin strap and is ventilated for maximum airflowSizes
- S - 57 cm
- M – 58cm
- L – 60 cm
- XL – 62 cm
-
- Cool and comfortable premium gold deer grain leather palm for great feel and durability - Perforated fourchettes for increased airflow - Black nylon, lycra, foam back for extended wearer comfort and flexibility - Black neoprene knuckle bar to guard against knocks - Elastic cuff with hook and loop fastener -
- 5mm SBR foam insert for best "VA" (Vibration Attenuation) - One-piece synthetic leather Geko Grip palm - Integrated terry cloth sweat wipe - Cut-off fingers design is perfect for handling small parts - Rubberised reinforced thumb and forefinger for more gripping power - Reinforced stitching on fingers - Doffing pull-tab for easy removal - Easy-on finger loop - Lightweight breathable mesh backing - Padded knuckles -
- Made from a polyethylene (Olefin) film laminated to a polypropylene spun bound non-woven substrate - Lightweight and soft with excellent strength - Breathable to reduce moisture build up - Water vapour permeable and water repellent - Excellent barrier to dust and broad range of chemicals - Type 5 - Particle tight clothing - Type 6 - Limited splash particle tight clothing - Lint-free - Good opacity - Two way zipper for when nature calls - Ready access to clothing underneath -
- PVC/Polyester with elastic cuffs plus studs - Two large pockets - Hood with drawstring -
FEATURES
- No reflective tape
- Compliant to Australian Standards - Class D
-
No reflective tape - compliant to Australian Standards - Class D -
'H' Back reflective tape to meet Australian Standards - Class D/N -
'H' Back reflective tape to meet Australian Standards - Class D/N -
'X' Back reflective tape to meet Australian Standards - Class D/N -
"X" Back 3MTM reflective tape to meet Australian Standards - Class D/N -
Features:
- Smooth glide adjustable clips
- Easy adjust elastic outer panels for added lower back support
- Tapered abdomen support panels
- 35mm wide support elastic braces
- Adjustable belt and braces for a comfortable fit
-
FEATURES
- Cotton Jersey 200gsm
- 100% Cotton Jersey.
- Two tone safety polo with contrast stripes on collar
- Under arm mesh ventilation
- Left hand chest pocket with pen partition
- Conforms to 4602.1:2011 Class D
- Contrast collar and lower front
-
FEATURES
- Heavy duty nylon zipper
- Flap chest pocket with zip
- Internal mobile pocket, two side pockets
- Two tone front and back
- Fabric: 311 gsm heavyweight cotton drill outer shell with cotton lining.
-
Product Specification Sheet
____________________________________
FEATURES
- Partial elastic cuff with touch tape tab for adjust
- Two front angled side welt pockets
- Internal zip pocket LHS
- Internal pocket with touch tape on RHS
- Cotton quilted lining with polyester filling
- Reflective tape - hoop pattern
- 100% Cotton drill 310gsm / 100% Polyester Lining
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
- Meets AS/NZS 1906.4:2010 Retro-reflective materials & High Visibility materials for safety garments
- Acceptable fabric composition as listed in AS/NZS 1020:1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection - AS 4399:2020 Sun Protective Clothing - Evaluation and Classification
-
Features
- Shower proof, fabric collar, ribbing cuffs and waistband
- Two studs on side pockets, heavy duty nylon zip.
- Two tone front and back
- Fabric: 21oz, 90% wool, 10% polyester, cotton lined
-
Description
- Shower proof with fabric collar, ribbing cuffs and waistband
- Two studs on side pockets, heavy duty nylon zip
- Two tone front and back. Hoop style CSR reflective tape
- Fabric: 21oz, 90% wool, 10% polyester, cotton lined
Features
- Sun Protection UPF 40+ - 50+
- HiVis Standard Class F AS/NZS1906,4:2010
- DNC HiVis Garments are manufactured to comply with New HiVis Standard Class F
- 3M Scotchlite CSR Relective Tape fully complies with AS/NZS1906:4:2010
- Home Wash 50 cycles@60C
-
Features
- 300D heavy duty polyester/PU, seam-sealed.
- Waterproof outer shell, 2 flap side pockets, mesh lining, foldaway hood.
- Storm cuffs with adjustable sleeve tabs, mobile phone pocket.
- 3/4 Length.
Call For Expert Advice:
02 9744 1099
For Advice On Your Workwear & Safety Order, Call Now
Call For Expert Advice:
02 9744 1099
For Advice On Your Workwear & Safety Order, Call Now
