Call For Expert Advice:-
- B-Safe self retracting lanyard allows mobility up to 2.5 metres. - Features a webbing guide to prevent twisting and a tough, impact resistant plastic case. - Comes complete with 2 karabiners, and an integral shock absorber - Oval double action karabiner each end -
This T-Bar temporary anchor plate is engineered for extreme workplace situations. It boasts a minimum breaking strength of 22kN.Features:
- Suitable for Fall arrest application on metal roofs
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated up to a 140kg user
- Can be used as a temporary anchor point in applications along a roofline where no permanent anchor point exists.
Warning:
For use on metal clad roof only. -
Product Data Sheet- This device allows safe decent in either an emergency or if a breakdown occurs of the EWP.
- Controlled Decent Device (CDD) to allow self-control of decent or from the ground
- Kernmantle rope: 11mm
- Karabiner and hammerlock
- Attachment eye anchor and anchorage plate
- High reflective orange storage drop box
- Rope Length: 20m
-
This Roofers Kit has been designed to meet the general requirements of workers who are working at heights. The kit offers great value for money as opposed to buying the items individually.Kit Includes:
Kit Bag- Heavy Duty & Waterproof
- 720mm x 320mm x 135mm
- Opening: 18mm
- Rating 25kN
- Width 58mm
- Length 110mm
- 25mm - 1.5M
- Rate to 22kN
- 450mm Shock Pack
- Batch tested to AS/NZS 1891.1: 3.8m drop using 100kg test weight, reducing forces to under 4.5kN
- Pebble weave webbing provides maximum grip precluding incidental buckle slippage
- Combined belay loop sub pelvic strap positioning reduces risk of throat and facial injury at moment of impact
- Retro-reflectivity built into webbing for improved visibility in low light
- 160kg wearer capacity (combines weight of wearer & tools)
- Articulated chest and shoulder straps adjustment points designed for female wearers
Product Specification Sheet
-
Features:
- Pebble Weave Webbing design provides maximum grip for buckles
- High Tenacity UV stabilised webbing, enhances resistance to solvents & UV light degradation
- Retro-Reflective thread in webbing for improved visibility in low light
- Large Dorsal D Ring for easier connection
- Closed-loop webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Reducing risk of injury from hardware hitting the back of workers head
Applications:
- Fall Arrest, Construction, Ladder, Scaffolding, Warehouse
Product Details:
- AUS/NZ designed & engineered
- 10 year life span
-
Features:
- LINQ Essential harness H101
- WLO1SNSN Shock Absorbing Webbing Lanyard Single Leg (with 2 x Snap Hooks) x 1
- RKRG015 Rope kernmantle with thimble eye & rope grab. 15M with permanently attached shock-absorbing 450mm assembly and screw gate karabiner
- HSASE2515 Anchor Strap Endless 25mm - 1.5M x 1
- KSGSA18 Screw Gate Karabiner x 2
- Kernmantle rope exceeds 14.7kN
- 110gm of polyester as opposed to 65gm. This results in exceptional strength capabilities
- Rope grab as per restraint technique, in order to ensure stopping force is less than 6kN, rope grab should always be used in conjunction with a shock absorbing element
- Batch tested to AS/NZS 1891.1: 3.8m drop using 100kg test weight, reducing forces to under 4.5kN
- An exclusive Extended Length Energy Absorber (ELEA) designed to protect a workers, of up to 160kg, tools and equipment
- Drop forged lanyard hardware for added strength in case of extreme conditions
- Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance
- Pebble weave webbing provides maximum grip precluding incidental buckle slippage
- Combined belay loop sub pelvic strap positioning reduces risk of throat and facial injury at moment of impact
- Retro-reflectivity built into webbing
- 160kg wearer capacity (combined weight of wearer, clothing and tools) when used in conjunction with LINQ shock absorbing lanyard
- Articulated chest and shoulder straps adjustment points designed for female wearers
- Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance
- Unique to LINQ - Green for safely locked - Red for not locked feature / indicator
- Available with Kit Bag, Round Bucket or Square Bucket
Product Specification Sheet
-
Premium LINQFlex webbing for extra comfort with up to 9% stretch which allows for more range and movement. Lightweight aluminium Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices. Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker. Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment. Confined Space Rescue Loops. Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall. Cam adjusters for quick adjustment. Padded Legs for force dispersion at moment of fall impact. Air COOL Padded Shoulder Straps for increased comfort and increased air flow. Retro-Reflective Thread in webbing for improved visibility in low light. Aluminium Quick Release Buckles. Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Comes with a GT harness bag. Service Pouch on back. Adjustable Waist Belt with tool loop attachments. Forward placed pole strap attachment points makes for easier to reach connection. Padded Sub Pelvic Seat for Pole Strap restraint High Comfort spec. Large Pole strap O-rings for ease of connecting Pole Strap (work positioning).Product data sheet -
LINQ Hard Hat Lanyard Only Features:- Clips on either end attach to hard hat and collar to prevent loss of headwear when working at heights
- Hi-Vis orange elastic lanyard for easy visual location
- Lanyard Material: Durable polyester/ elastic blended webbing
- Plastic Material: PE (Polyethylene)
- Weight: 15 grams
-
- The LINQ Ladder Gutter BRAQ-IT has multi-positional slide brackets to fit most rung ladders.
- The LINQ fit and forget design becomes integral to the ladder it is attached to.
- Comes with I.D plate with Batch and Date of Manufacture for ease of traceability.
- Durable powder coated finish.
- Fit and forget attachment once adjusted into place.
- Seamlessly integrates into most ladder rungs, providing enduring support.
- Protects gutter profile with integrated rubber lining.
- Adjustable wing and clamp makes it versatile to use on most ladders.
- Ensures safety of user on and off the ladder.
- AUS/NZ Designed and Engineered
- Adjusts up to 475mm wide.
-
Features:- Self fusing silicon tape for easy adhesion, no heat required
- Hi-Vis Orange tape for easy visual location
- Durable silicone provides long lasting adhesion and grip
- Tape Material: Silicone
- Weight: 95 grams
- Width: 25mm
- Length: 10M
-
- The LINQ Tetha Roof T Bar temporary anchor plate is engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 15kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- It is important to ensure that the structure to which any LINQ Tetha Roof T-Bar is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.
- The Tetha T-Bar has an easy to use camlock, no fixing required.
- Install within seconds
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4).
- Suitable for Fall Arrest application on metal roofs. To be used on metal clad roofs only.
- Conforms to ASNZS 1891.4 requirements.
- Conforms to ASNZS 5532:2013
- Passed the corrosion test in accordance with ISO 9227:1990 – 24 hours. LINQ conducts testing over a 48 hour period.
-
Features:- Tool Lanyard rated to maximum load limit of 5kg
- 80cm length extends to 120cm
- Hi-Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- 3 x Swivel Double Action Karabiners to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Anodized aluminium alloy
- Weight: 130 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 5kg
-
Features:- Tool Lanyard rated to maximum load limit of 5kg
- 80cm length extends to 120cm
- Hi-Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- 2 x Swivel Double Action Karabiners to reduce tangling
- Lanyard Material: Durable polyester/ elastic blended webbing
- Connector Material: Anodized aluminium alloy
- Weight: 85 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 5kg
-
Details:- Lanyard Material: Durable polyester/ elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Weight: 75 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 1.86kg
- Tool Lanyard rated to maximum load limit of 1.86kg
- 80cm length extends to 120cm
- Hi-Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- 2 x Swivel Snap Hooks to reduce tangling
-
Features:- Tool Lanyard rated to maximum load limit of 0.6kg
- 60cm length extends to 80cm
- Detachable sliding loop lock keeps tools in place and connected, can be used for quick tool swap over
- Hi-Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- Swivel Double Action Karabiner to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Anodized aluminium alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 55 grams
- Length: 60cm (extends to 80cm)
- Maximum Working Load Limit: 0.6kg
-
Features: • Tool Lanyard rated to maximum load limit of 5kg • 80cm length extends to 120cm • Sliding loop lock keeps tools in place and connected • Hi-Vis orange lanyard for easy visual location • 3 Bar stitch pattern for increased strength • Swivel Double Action Karabiner to reduce tangling Details: • Lanyard Material: Durable polyester/ elastic blended webbing • Connector Material: Anodized aluminium alloy • Plastic Material: PE (Polyethylene) • Loop Tail Material: Polyester • Weight: 60 grams • Length: 80cm (extends to 120cm) • Maximum Working Load Limit: 5kg -
PRODUCT FEATURES- Tool Lanyard rated to maximum load limit of 0.6kg
- 60cm length extends to 80cm
- Detachable sliding loop lock keeps tools in place and connected, can be used for quick tool swap over
- Hi-Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- Swivel Snap Hook to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 50 grams
- Length: 60cm (extends to 80cm)
- Maximum Working Load Limit: 0.6kg
-
Details:- Lanyard Material: Durable polyester/ elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 50 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 1.86kg
- Tool Lanyard rated to maximum load limit of 1.86kg
- 80cm length extends to 120cm
- Sliding loop lock keeps tools in place and connected
- Hi-Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- Swivel Snap Hook to reduce tangling
Working at height is one of the leading causes of fatalities and major injuries in the workplace.
‘Working at height’ means working in any place where, if there were no precautions in place, a person could fall a distance liable to cause personal injury. In Australia, falls account for about 11% of deaths in the workplace, with half of these fatalities occurring from heights of three metres or less. Due to this, Australian height safety laws have been put in place to minimise the risk of injury or death.
If you’re an employer with staff who work at heights, here are five things you should know about the Australian height safety laws.
- It’s all about managing falls
Australian height safety laws are designed to reduce injury by managing risks of falls. Anyone running a business is responsible for managing risks to health and safety associated with falls that are reasonably likely to cause injury to any person in that workplace. - There are different types of falls
Australian height safety laws outline the different types of falls that could happen in the workplace. As an employer, it’s important for you to consider all the different types of falls that could occur in your workplace and incorporate them into your WHS plan.
The different types of falls outlined in the legislation are:
–> working in an elevated place
–> working near an opening that someone could fall through
–> working near an edge that someone could fall off
–> working on uneven and unstable surfaces, as well as any other surface from which someone could fall
–> any other workplace-specific places that could cause falls. - Work should be conducted on the ground whenever possible
One of the key ways Australian height safety laws try to mitigate risks of falls is to legislate that work must be carried out on the ground – or on a solid construction – whenever it is reasonably possible to do so. It is also the responsibility of the employer and their management to ensure this law is abided by in the workplace. - It’s your responsibility to provide safety gear to manage fall risks
Another way Australian height safety laws try to mitigate risks of falls is to legislate for the provision of adequate height safety gear by the employer to their workers. This clause applies if it is not reasonably practicable for the employer to eliminate the risk of falls in other ways. - Failure to comply with Australian height safety laws carries a hefty fine
If your business or your workers are found to break any of the Australian height safety laws, your business could be liable to receive a $30,000 fine. Also, any individuals involved could receive personal fines of $6,000.
For more information about the Australian height safety laws, be sure to consult Work Health and Safety Legislation on falls in your state.