• Rain Storm Jacket Breathable - Yellow
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • FEATURES

    • 190 gsm cotton
    • UPF 50+ high sun protection
    • Open front & pleated back
    • Longer tail
    • Double-stitched for strength
    • Deep pockets & pen holder
    • Spare buttons
    • Hi Vis class DN-3M 8910 tape
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) Reflective Trim: Nil Class D only - Length: 1300mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength
    • These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global.
    • This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure.
    Tecasafe plus fabric benefits:
    • Inherently flame resistant
    • Electrical arc flash and flash fire protection
    • Extremely comfortable to wear - soft and breathable
    • Excellent moisture management
    • Exceptional abrasion resistance
    • IEast care washing and maintains like-new appearance after multiple industrial washes
    IMPORTANT: NFPA 70E Compliance requires wearing of whole system (3 pieces) as ONE UNIT. 3 Pieces including hood/ coat / leggings or hood/ jacket/ bib & brace trousers. Once a garment has been exposed to an arc flash, it must be removed from service.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • - Certified NFPA 2112 Flash Fire - Certified EN ISO 11612 - NFPA70E Electrical Arc Protection - ASTM F1959 (HRC1: ATPV 6.8cal/cm2*; HRC2: ATPV 8.0cal/cm2) - The arc rating test results are independently tested in accordance to the ASTM F1959 standard.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • - Seamless 15 gauge nylon for superior dexterity - 3/4 coat for back of hand protection - Foam PVC HPT coat provides a spongy, durable and flexible grip - The HPT further repels liquid to ensure excellent wet and dry grip. - Encapsulated air molecules provide vibration absorption - Foam PVC unlike nitrile resists many glues, making it ideal for woodworking and auto assembly - Sanitised with Actifresh® to kill bacteria and promote freshness
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • 'H' Back reflective tape to meet Australian Standards - Class D/N
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • 'X' Back reflective tape to meet Australian Standards - Class D/N
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Features

    • 300D heavy duty polyester/PU, seam-sealed.
    • Waterproof outer shell, 2 flap side pockets, mesh lining, foldaway hood.
    • Storm cuffs with adjustable sleeve tabs, mobile phone pocket.
    • 3/4 Length.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Features

    • 300D heavy-duty breathable polyester/PU, seam-sealed.
    • Waterproof outer shell with carbon grid.
    • Elastic drawstring waist with leg zippers and press studs closure.
    • 3M 8906 Reflective Tape.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Features

    • 190D Polyester/PU.
    • Waterproof, two side pockets.
    • 3M 8906.
    • Upper HiVis fabric complies with AS/NZS1906.4:2010.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • ArcSafe® T40 Arc Flash Switching Coat with 3M Reflective Trim

    Colour: Orange Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner - Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 - Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) - Reflective Trim: 3M 8935 Reflective Trim Class D/N - Length: 1300mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength - These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D/N by SAI Global. - This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure.

    Tecasafe plus fabric benefits:

    • Inherently flame resistant
    • Electrical arc flash and flash fire protection
    • Extremely comfortable to wear - soft and breathable
    • Excellent moisture management
    • Exceptional abrasion resistance
    • IEast care washing and maintains a like-new appearance after multiple industrial washes
    IMPORTANT: NFPA 70E Compliance requires wearing of the whole system (3 pieces) as ONE UNIT. 3 Pieces including hood/ coat / leggings or hood/ jacket/ bib & brace trousers. Once a garment has been exposed to an arc flash, it must be removed from service.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • ArcSafe® T40 Arc Flash Switching Jacket

    Colour: Orange Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner - Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 - Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) - Reflective Trim: Nil Class D only - Length: 870mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength - These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global. - This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure.

    Tecasafe plus fabric benefits:

    • Inherently flame resistant
    • Electrical arc flash and flash fire protection
    • Extremely comfortable to wear - soft and breathable
    • Excellent moisture management
    • Exceptional abrasion resistance
    • IEast care washing and maintains like new apprearance after multiple industrial washes
    IMPORTANT: NFPA 70E Compliance requires wearing of whole system (3 piece) as ONE UNIT. 3 Pieces including hood/ coat / leggings or hood/ jacket/ bib & brace trousers. Once a garment has been exposed to an arc flash, it must be removed from service.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Colour: Orange Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) Reflective Trim: Nil Class D only - 50mm braces - Velcro leg cuff closures - Bar tacking for extra strength
    • These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global.
    • This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc
    • Rated Finished Products in an Electric Arc Exposure.
    Tecasafe plus fabric benefits: - Inherently flame resistant - Electrical arc flash and flash fire protection - Extremely comfortable to wear - soft and breathable - Excellent moisture management - Exceptional abrasion resistance - IEast care washing and maintains like-new appearance after multiple industrial washes IMPORTANT: NFPA 70E Compliance requires wearing of whole system (3 piece) as ONE UNIT. 3 Pieces including hood/coat/leggings or hood/jacket/bib & brace trousers. Once a garment has been exposed to an arc flash, it must be removed from service.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Z59 Zetel® XT Waterproof Apparel Weight - 272gsm Z59 Zetel® XT Jacket Features
    • Fully seam sealed
    • Raglan sleeve construction
    • Under arm gusset and articulated elbow
    • Adjustable Velcro wrist storm cuff closure
    • Internal neoprene wrist cuff
    • Internal waterproof chest pocket
    • Two large external waist pockets with gripper pull tabs
    • Adjustable elasticised waist draw cord
    • Chest radio loops
    • Two way centre front zip closure and chinsulator
    • Zipper grip pull tabs
    • Press stud storm flap and internal weather proof tunnel
    • Stowaway 3 way adjustable hood with peak that can accommodate a safety helmet
    • 3M 8935 FR reflective tape and reflective piping seam detail
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Flying Jacket - Yellow/Navy with Ref Trim •Two-toned bomber style •Padded quilted liner •Concealed hood •3M Reflective Trim - Class D/N •Zip front with ribbing base, cuffs and collar •Pen and mobile phone pocket on arm •Hand warmer pockets, one inside each pocket Elliott Flying Jackets are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D/N by SAI Global.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Flying Jacket - Yellow/Navy with Ref Trim
    • Jacket with removable padded quilted
    • Class D/N high visibility vest
    • ZETEL XR high visibility waterproof, windproof oxford material, seams fully seam sealed
    • Interchange Lining System (BLUE) - this garment includes a removeable zip out liner. The liner has removable sleeves and is compliant to Class D/N and is reversible
    • 3M Reflective Tape
    • Batwing design - unique sleeve construction allows for maximum movement - your arms go up, your jacket stays down
    • Zip closure with press stud storm flap closure
    • Two large external hand warmer/ gear pockets and one internal pocket
    • Ribbing sorm cuffs to keep out water and cold
    • Draw cord storm hood that stows away into your collar
    Elliott Z40 Jackets are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D/N by SAI Global.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Features

    • Reflective heat sealed tape in ‘Hoop’ pattern around body and biomotion taping on sleeves
    • Waterproof jacket with breathability
    • Three layer water resistant fabric
    • Waterproof rating over 20,000mmH2O
    • Water vapour penetration over 4000G/M2/24hrs
    • All seams are seam sealed
    • Full body in hi visibility colour
    • Inner collar stand in brush fabric - velour
    • Waterproof zipper closure at opening
    • Waist pockets with zipper closure
    • Internal LHS heat seal zip patch pocket
    • Shaped back tail and sleeve hem
    • Shaped concealed built in hood with collar stand and adjustable cord for additional weather protection

    Fabric

    • 100% Polyester Ripstop with TPU Coated and 20D Polyester Tricot Laminate, 150gsm
    • 100% Polyester Velour - Black
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • AS/NZS 1906.4:2010 EN ISO 14116 EN 1149 -1 ASTM F1959/F1959M-12 (ATPV 26 CAL/CM2)
    • Side access pockets
    • Drawcord adjustable waist for a secure and comfortable fit
    • Taped seams to provide additional protection
    • Zipped ankles for easy access
      Outer Fabric Type: 60% Modacrylic, 38% Cotton, 2% Antistatic Carbon Fibre with Breathetec PU Laminate, 300g   Inner Fabric Type: 100% Cotton Flame Resistant Lining, 160g
    Select options This product has multiple variants. The options may be chosen on the product page Details
Go to Top