• Ultrasonic Heated Tunnel Jacket Black

    $199.65 incl. GST
    The Ultrasonic Heated Tunnel Jacket offers the best in insulation solutions. Carbon fibre heated panels are embedded into this padded jacket to bring extra warmth and comfort to the wearer. The use of innovative heat sealed baffle fabric increases its water resistance. The S547 also has three heat settings controlled by a button at the chest and includes a rechargeable battery that offers 3-10 hours of heat.

    Features:

    • Drawcord adjustable hem
    • Elasticated cuffs for a secure fit
    • Zipped pockets
    • Front zip opening
    • Premium water-resistant fabric
    • 3 pockets for ample storage
    • Fully lined and padded to trap the heat and increase warmth
    • Inner soft Insulatex lining offering warmth and comfort
    • Concealed mobile phone pocket
    • Easy grip pullers
    Shell Fabric: 100% Polyester 65g
    Lining Fabric: 100% Polyester 55g
    Filling Fabric: Insulatex Lining 260g
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Outer Trousers Elect FR HRC2 (ATPV17) Orange Reflective

    Outer Trousers Elect FR HRC2 (ATPV17) Orange Reflective

    $214.50 incl. GST
    - Certified NFPA 2112 Flash Fire - Certified EN ISO 11612 - NFPA70E Electrical Arc Protection - ASTM F1959 (HRC1: ATPV 6.8cal/cm2*; HRC2: ATPV 8.0cal/cm2) - The arc rating test results are independently tested in accordance to the ASTM F1959 standard.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Graphex Quantum Glove

    Graphex Quantum AGT Cut 5/Level F Glove (12 Pack)

    $253.00 incl. GST

    The WORLD'S thinnest, lightest & most comfortable cut level F gloves!

    Only $17.63 per Glove excl GST

    Features:

    • Incorporating Graphex cut resistant yarn
    • Extended thumb and forefinger saddle for product longevity
    • Most dexterous Cut Level F glove available
    • Certified to Cut Level F under European Standard EN388:2016
    • Certified to Cut Level 5 under Australian Standard AS/NZS 2161.3:2005
    • Certified to Contact Heat Level 1 under EN407:2004
    • Contact Food Safe under AS 2070:1999 (FDA 21CFR177.2600)
    • Active Grip Technology for superior use in wet and dry conditions
    • Extended wear with up to 14,000 abrasion cycles
    • Touch Screen friendly
    • Silicone and fiberglass free construction
    • Actifresh treated to inhibit odors and bacteria
    • 360-degree breathability
    • UPF50+ offering maximum sun protection
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • HiVis FR & HRC2 D/N Rain Jacket HiVis FR & HRC2 D/N Rain Jacket

    HiVis FR & HRC2 D/N Rain Jacket

    $260.26 incl. GST

    Description

    280gsm "3 layer bonded into 1" waterproof and breathable fabric, 99% polyester & 1% Anti-static carbon outer laminated to 50% Modacrylic & 50% cotton inner(soft & comfortable against skin),  Fully seam sealed, HRC2 – ATPV: 8+cal/cm2. 2 way radio loops on front shoulders, Storm flap at center front with SBS 8# Vislon 2 way heavy duty zipper/plastic slider; Detachable zip off hood with SBS 5# Vislon zipper, elastic cuffs with adjustable sleeve tab & touch tape closure. Twin waist pockets with flap and touch tape closure. Hoop Pattern Bio-Montion “ANS UL-209 FR” Segmented FR Reflective Tape(50 washes) on Body & sleeves. 2 Tone front only.

    Features

    • NFPA 70E(HRC2, ATPV: 8+ Cal/cm²)
    • ISO 11612:2015(FR) ISO 14116:2015(FR)
    • NENS09:2014 EN 1149-5:2008(Anti-static)
    • AS/NZS 1906:2010(HiVis Material)
    • AS/NZS 4602.1:2011(HV Design D/N)
    • UPF 50+ AS/NZS 4399:2017
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • CUT 5 GLOVE

    Ninja Razr Diamond 5 EN388 Rating 4543 (Pack of 12)

    $267.30 incl. GST
    Description
    Ninja® RAZR Diamond 5 is a highly sophisticated cut resistant glove in the Ninja® RAZR range. These gloves are made with Dyneema® Diamond technology fibre which is the world’s most advanced cut resistant fibre; 40% lighter than aramid fibres and offers a 200% improvement in cut resistance performance over gloves made with standard Dyneema®. Ninja® RAZR Diamond 5 is lighter, cooler, more flexible and lasts longer than any other cut resistant glove. FEATURES • COATING – Soft PU coating offering superb flexibility and comfort • HIGH CUT PERFORMANCE – 200% improvement in cut resistance performance when compared to gloves made with standard Dyneema® fibre • EXCELLENT COMFORT – The dramatically thin fibre of Dyneema® Diamond technology allows for increased cut resistance without the fibreglass discomfort. It allows for better feel and control, and radiates heat away from hands for all-day comfort APPLICATIONS • Steel industry and sheet metal fabrication • Automotive industry • Glass and paper handling • Heavy metals handling • Plastic, carpet and cardboard trimming and cutting • Machine shops SMART TECHNOLOGIES FITSMART This is the art of making Ninja® gloves feel like a second skin. GRIPSMART This is the art of providing outstanding grip to Ninja® gloves in dry, wet and oily conditions. CUTSMART This is the art of providing outstanding cut resistance to gloves PROPRIETARY TECHNOLOGY RAZR - Cutting Edge Performance The Ninja® RAZR cut resistant range is the best that technology can offer. Developed by Ninja®’s progressive Innovation Team which creates and works with the most unique premium quality yarns and fi bres to produce world class cut resistant gloves. Ninja® RAZR gloves offer the dual benefi t of being the most reliable cut resistant gloves with unmatched comfort and control. HAND CARE TECHNOLOGIES STANDARDS AND CERTIFICATIONS  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Graphex Premier EXT Glove

    Graphex Premier EXT (12 Pack)

    $283.25 incl. GST
    The Force360 GraphexTM Range has been engineered using nanotechnology to create a Graphene based yarn, combining the highest level of cut resistance available with exceptional comfort, fit and dexterity.
    •  Incorporating GraphexTM cut resistant yarn
    •  Extended cuff offering forearm protection
    •  Certified to Cut Level F under European Standard EN388:2016
    •  Certified to Cut Level 5 under Australian Standard AS/NZS 2161.3:2005
    •  Extended wear with up to 15,000 abrasion cycles
    •  Contact Heat Level 1 for handling hot objects
    •  Reinforced thumb and forefinger saddle
    •  Active Grip Technology for superior use in wet and dry conditions
    •  Touch Screen friendly
    •  Silicone and fibreglass free construction
    •  Actifresh treated to inhibit odours and bacteria
    •  360 degree breathability
    • UPF50+ offering maximum sun protection
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Wet Weather Taped Jacket Inherent FR 3 Layer PPE3

    $291.50 incl. GST

    Description:

    Designed with a huge amount of interaction with our Australian Oil & Gas friends, our 3101 FR Jacket utilises a 3 layer composite outer shell, coupled with a soft touch FR Cotton-rich liner. Inherent, comfortable and outstanding against electrical arc.

    Features:

    • Front fob and side handwarmer pockets
    • Storm flap closure with FR Prym Studs - No Velcro throughout for AS qualities
    • Oversized, adjustable and removable Hood to suit Hard Hat usage
    • Back Harness Delta Entry Point for at-height use
    • Adjustable Outer Cuffs
    • Hood connected Spume Visor to protect face
    • Internal Mod/Cotton Lining for extra comfort/warmth
    • Two-way Safety Covered Zipper Closure

    Standards:

    • Certified NFPA 2112 - Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire
    • Arc rated in ASTM F1959 (NFPA 70E) - Electrical Safety in the Workplace - PPE3 ATPV 25.9 Cal/cm2
    • Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Day/Night Use
    • Meets AS/NZS 1906.4:2010 Retro-reflective materials & High Visibility materials for safety garments
    • Acceptable fabric composition as listed in AS/NZS 1020: 1995 The control of undesirable static electricity
    • Rated 50+ UPF Sun Protection - AS/NZS 4399: 1999 Sun Protective Clothing - Evaluation and Classification
    • Safe from harmful chemicals, certified by Oeko-Tex Standards 100

    Product Specification Sheet

    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Tecasafe Internal Jacket Orange Navy

    Tecasafe Internal Jacket Orange/Navy

    $299.99 incl. GST
    Colour - Orange Navy Material - Tecasafe® plus Weight - 235gsm/ 7.0oz Rating - PPE2 ATPV(cal/m2) = 9.0 Sizes Available - S to 4XL Tecasafe® plus FR Jacket Features • Centre front zip closure • Two hand warmer pockets • Internal pocket & external arm pocket • Cotton lined • Hook and Loop cuff closures • Sewn with Nomex FR threads • All stress points bar tacked • No metal components • AS4836:2011 compliant • 3M 8935 FR tape Tecasafe® plus Fabric Benefits • Inherently flame resistant • Electrical arc flash & flash fire protection • Extremely comfortable to wear soft and breathable • Excellent moisture management • Exceptional abrasion resistance • Easy care washing and maintains like new appearance after multiple industrial washes Compliance • Tecasafe® plus is UL Certified to NFPA 2112 • Meets Standards for FR Fabrics NFPA70E • Meets Standards for FR Fabrics ASTM F1506 • AS4836:2011 compliant • Manufactured to meet requirements of AS4602.1:2011 High Visibility Safety Garments
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Tecasafe Internal Jacket Yellow Navy

    Tecasafe Internal Jacket Yellow/Navy

    $299.99 incl. GST
    Colour - Yellow Navy Material - Tecasafe® plus Weight - 235gsm/ 7.0oz Rating - PPE2 ATPV(cal/m2) = 9.0 Sizes Available - S to 4XL Tecasafe® plus FR Jacket Features • Centre front zip closure • Two hand warmer pockets • Internal pocket & external arm pocket • Cotton lined • Hook and Loop cuff closures • Sewn with Nomex FR threads • All stress points bar tacked • No metal components • AS4836:2011 compliant • 3M 8935 FR tape Tecasafe® plus Fabric Benefits • Inherently flame resistant • Electrical arc flash & flash fire protection • Extremely comfortable to wear soft and breathable • Excellent moisture management • Exceptional abrasion resistance • Easy care washing and maintains like new appearance after multiple industrial washes Compliance • Tecasafe® plus is UL Certified to NFPA 2112 • Meets Standards for FR Fabrics NFPA70E • Meets Standards for FR Fabrics ASTM F1506 • AS4836:2011 compliant • Manufactured to meet requirements of AS4602.1:2011 High Visibility Safety Garments
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Force 360 DEFENDER Coverall Disposable (50 per carton)

    Force 360 DEFENDER Coverall Disposable (50 per carton)

    $338.80 incl. GST
    50 per carton minimum General Description-  Force360 Force Performance Range (FPR) of disposable coveralls. The Defender CFPR181 and CFPR182 offers certified Type 5 and 6 protection, with superior strength and the highest breathability. Features- 
    • 55GSM SMS
    • Stick Down Flap
    • Fingerloops
    • 3 Piece Hood
    • Retail Packaged
    Uses- 
    • Food Processing
    • Abattoirs
    • Asbestos Removal
    • Insulation
    • Pesticide Spraying
    • Waste Control
    • Cleanroom
    • Painting
    • Medical/Laboratory
    • Construction and Mining
    Standards & Certification-  Force360 coveralls are Category 3 (PPE of complex design intended to protect against death or serious injury) CE certified under lic number 0302 Quality Management System. Force360 coveralls are all constructed to stringent European Standards. The manufacturing facility is also ISO9001 accredited. Lic number 00109Q26005ROM/4200.  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Force 360 DEFENDER Coverall Disposable Blue (50 per carton

    Force 360 DEFENDER Coverall Blue (50 per carton) $6.78 each!

    $338.80 incl. GST
    General Description Force360 Force Performance Range (FPR) of disposable coveralls. The Defender CFPR181 and CFPR182 offers certified Type 5 and 6 protection, with superior strength and the highest breathability. Features
    • SMS (spunbonded-meltblown-spunbonded) is a unique trilaminate construction offering good tensile strength and barrier protection
    • Bat wing design
    • Stitched seams and reinforced crotch for product durability
    • Elasticised waist, hood, ankles, wrists and thumb loop for a secure fit
    • Self-adhesive zip flap provides an overall seal
    • Two way zip
    • 3 piece hood provides greater movement and comfort
    Uses
    • Food Processing
    • Abattoirs
    • Asbestos Removal
    • Insulation
    • Pesticide Spraying
    • Waste Control
    • Cleanroom
    • Painting
    • Medical/Laboratory
    • Construction and Mining
    Standards & Certification Force360 coveralls are Category 3 (PPE of complex design intended to protect against death or serious injury) CE certified under lic number 0302 Quality Management System. Force360 coveralls are all constructed to stringent European Standards. The manufacturing facility is also ISO9001 accredited. Lic number 00109Q26005ROM/4200.  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Portwest Premium ARC 3 Protection Flash Jacket

    Portwest Premium ARC 3 Protection Flash Jacket

    $383.63 incl. GST
    AS/NZS 4602.1:2011 CLASS D/N EN ISO 14116 EN 1149 -1 ASTM F1959/F1959M-12 ATPV 26 CAL/CM2
    • 9 pockets for ample storage
    • Pack away detachable hood for convenience
    • Card holder for ID card display
    • Touch tape cuffs for a secure fit
    • D ring access
    • Inner knitted cuff
    • Taped seams to provide additional protection
    Outer Fabric Type: 60% Modacrylic, 38% Cotton, 2% Antistatic Carbon Fibre with Breathetec PU Laminate, 300g Inner Fabric Type:  100% Cotton Flame Resistant Lining, 160g
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Graphex Quantum Glove Graphex Quantum AGT Cut 5/Level F Glove

    Graphex Quantum+ AGT Cut 5/Level F Glove (12 Pack)

    $405.90 incl. GST

    The WORLD'S thinnest, lightest & most comfortable cut level F gloves!

    Only $28.12 per Glove excl GST

    Features:

    • Incorporating Graphex® cut resistant yarn
    • Extended thumb and forefinger saddle for product longevity
    • Most dexterous Cut Level F glove available
    • Back of hand impact protection
    • Certified to Cut Level F under European Standard EN388:2016
    • Certified to Cut Level 5 under Australian Standard AS/NZS 2161.3:2005
    • Certified to Contact Heat Level 1 under EN407:2004
    • Contact Food Safe under AS 2070:1999 (FDA 21CFR177.2600)
    • Active Grip Technology for superior use in wet and dry conditions
    • Extended wear with up to 14,000 abrasion cycles
    • Touch Screen friendly
    • Silicone and fibreglass free construction
    • Actifresh treated to inhibit odours and bacteria
    • 360 degree breathability
    • UPF50+ offering maximum sun protection
    Product Specification
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Force 360 DEFENDER Coverall Disposable (50 per carton)

    Force 360 MAXREPEL White Coverall Disposable (Carton of 50)

    $508.20 incl. GST
    General Description- Force360 Force Performance Range (FPR) of disposable coveralls. The MaxRepel+ CFPR180 offers certified Type 4, 5 and 6 protection, with superior strength and breathability. Features- 
    • 65GSM Microporous
    • Stick Down Flap
    • Fingerloops
    • Hi Vis Seams
    • 3 Piece Hood
    • Retail Packaged
    Uses-
    • Food Processing
    • Abattoirs
    • Asbestos Removal
    • Insulation
    • Pesticide Spraying
    • Waste Control
    • Cleanroom
    • Painting
    • Medical/Laboratory
    • Construction and Mining
    Standards & Certification-  Force360 coveralls are Category 3 (PPE of complex design intended to protect against death or serious injury) CE certified under lic number 0624 Quality Management System. Force360 coveralls are all constructed to stringent European Standards. The manufacturing facility is also ISO9001 accredited. Lic number 00109Q26005ROM/4200.  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • PowerForm S6 Biodegradable Gloves (1000pk) PowerForm S6 Biodegradable Gloves (1000pk)

    PowerForm S6 Biodegradable Gloves (1000pk)

    $598.95 incl. GST
    EcoTek - is an important technology SW has developed in support of global sustainability initiatives. The new technology dramatically accelerates biodegradability of our nitrile gloves ultimately in landfills.   Click here to find out more about EcoTek and its contribution to global sustainability.   Applications:
    • Food handling, processing and packaging
    • Janitorial maintenance
    • Chemical handling
    • Laboratory analysis
      Features:
    • TouchTek protects skin and prevents contamination
    • MilTek offers durability and tactile sensitivity
    • EcoTek technology makes gloves biodegradable in 945 days
    • Dermatologically Approved by the Skin Health Alliance
    • Fully textured surface delivers excellent grip
      Specifications:
    • Length: 25cm
    • Palm thickness: 5.0mil/0.13mm
    • Silicon Free
    • FDA comliant
    • Watertight AQL: 1.5
    • Nitrile powder-free material
      Certifications: 
    • EN 420:2003
    • REACH EU 1907/2006
    • DIRECTIVE 2011/65/EU
    • EU Reg 528/2012
    • CAT III COMPLEX DESIGN
    • FDA 21 CFR 177.2600. Component materials comply with FDA regulations for food contact.
      NOTE: PRICE IS BASED ON PER CARTON, WHICH CONTAINS 10 BOXES WITH 100 PAIRS OF GLOVES PER BOX. Total qty per carton = 1000 pcs.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • ARC Flash non-reflective switching jacket

    ArcSafe T40 Switching Jacket 870mm Long Orange ATPV 40 PPE4 (HRC4)

    $621.50 incl. GST

    ArcSafe® T40 Arc Flash Switching Jacket

    Colour: Orange Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner - Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 - Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) - Reflective Trim: Nil Class D only - Length: 870mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength - These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global. - This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure.

    Tecasafe plus fabric benefits:

    • Inherently flame resistant
    • Electrical arc flash and flash fire protection
    • Extremely comfortable to wear - soft and breathable
    • Excellent moisture management
    • Exceptional abrasion resistance
    • IEast care washing and maintains like new apprearance after multiple industrial washes
    IMPORTANT: NFPA 70E Compliance requires wearing of whole system (3 piece) as ONE UNIT. 3 Pieces including hood/ coat / leggings or hood/ jacket/ bib & brace trousers. Once a garment has been exposed to an arc flash, it must be removed from service.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • ArcSafe T40 Switching Bib & Brace Trousers ATPV 40 PPE 4 (HRC4) – Orange

    $627.00 incl. GST
    Colour: Orange Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) Reflective Trim: Nil Class D only - 50mm braces - Velcro leg cuff closures - Bar tacking for extra strength
    • These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D by SAI Global.
    • This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc
    • Rated Finished Products in an Electric Arc Exposure.
    Tecasafe plus fabric benefits: - Inherently flame resistant - Electrical arc flash and flash fire protection - Extremely comfortable to wear - soft and breathable - Excellent moisture management - Exceptional abrasion resistance - IEast care washing and maintains like-new appearance after multiple industrial washes IMPORTANT: NFPA 70E Compliance requires wearing of whole system (3 piece) as ONE UNIT. 3 Pieces including hood/coat/leggings or hood/jacket/bib & brace trousers. Once a garment has been exposed to an arc flash, it must be removed from service.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • ArcSafe T40 Switching Jacket 870mm Long Orange/Ref Trim ATPV 40 PPE4 (HRC4)

    $680.90 incl. GST

    Features:

    Colour: Orange Material: Tencate Tecasafe plus. Outer fabric: 235gsm (7.0oz) Tecasafe plus, Lining Fabric: 306gsm (9.0oz) Q8 Thermal Liner - Meets Standards for Flame Resistant Fabrics - ASTM F1506 and NFPA 70E, Tecasafe plus is UL Certified to NFPA 2112 - Arc Rating: ATPV - 40cal/cm; PPE4 (HRC4) - Reflective Trim: 3M 8935 Reflective Trim Class D/N - Length: 870mm - Full Velcro front closure - Fr Knit Writers for extra protection - Bar tacking for extra strength These garments are manufactured from materials conforming to AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - High-visibility materials for safety garments. These garments are certified to Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments Class D/N by SAI Global. - This ArcSafe® Arc Flash protective garment has been independently tested by Kinectrics to ASTM F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure. Tecasafe plus fabric benefits: - Inherently flame resistant - Electrical arc flash and flash fire protection - Extremely comfortable to wear - soft and breathable - Excellent moisture management - Exceptional abrasion resistance - IEast care washing and maintains like-new appearance after multiple industrial washes IMPORTANT: NFPA 70E Compliance requires wearing of the whole system (3 pieces) as ONE UNIT. 3 Pieces including hood/ coat / leggings or hood/ jacket/ bib & brace trousers. Once a garment has been exposed to an arc flash, it must be removed from service.
    Select options This product has multiple variants. The options may be chosen on the product page Details
Go to Top